KISS 2 EXTRA BASE

Isofix base, for Klippan Kiss 2 Plus car seat, Group 0+/1

Klippan Kiss 2 Plus Isofix base, from birth up to 18 kg, rear-facing, available in 3 colors.

The base can be installed on an Isofix system or by being belted. It is an ideal asset if you change cars or if you want to use it in several vehicles.

The base of the Kiss 2 Plus is reinforced with a load leg and an anti-rebound shield.

The base includes an adjustable headrest to complement the cosy and allow the seat to be able to accommodate your child as they grow. The Isofix base is also adjustable. The cosy part can be pulled away from the frame that touches the vehicle seat in order to optimize the comfort for your child's legs.

Installation :

The Klippan Kiss 2 Plus is a compact seat that fits many cars brands. It can be installed with the belt base or with the Isofix anchor system. The headrest is included with the purchase of the seat.

Installation with Isofix base : unfold the load leg and position the base on the vehicle seat. Pull the red lever in the center of the base to deploy the Isofix points and attach them to the vehicle's anchor points. When the base is properly anchored to the vehicle, indicators change from red to green, so there is no risk of error during installation. Next, bring the base part closer to the Isofix part. Then adjust the height of the load leg so that it is well wedged on the floor of the vehicle. Position the cosy in the base and press to clip the cosy until the indicators turn green.

Belted Base Installation : Unfold the load leg and position the base on the seat. Make sure the two blue dots on the base are aligned. Place the lap belt behind the frame and thread it through the blue brackets on both sides of the base. Open the blue clip in the center of the base and pass the other part of the belt through it, push the base to wedge it in, tighten the belt to the maximum and close the blue clip. Then adjust the height of the load leg so that it is well wedged on the floor of the vehicle. Position the cosy in the base and press to clip the cosy until the indicators turn green.

Technical specifications :

Weight : 6.15 kg

Maximum Length for the load leg (support stand): 53 cm

Manufacturer warranty: 1 year

One additional year of guarantee offered by Babylor

The Isofix base of the Kiss 2 Plus is available in 3 colors :

- Sport (contour of the cosy and grey seams with black interior)

- Freestyle(contour of the cosy and black interior with grey seams)

- Black Orange (black contour and interior with orange stitching)