Car seat Easygo Nino navy

Easygo Nino car seat, Group 1/2/3

Easygo Nino car seat, from 9 kg to 36 kg, available in 3 colors.

Usage :

Period of use: from 9 kg to 36 kg (approx. 6 months to 10 years).

Group : 1/2/3

Strengths :

The height of the backrest and shoulder straps of the Nino can be adjusted in 10 steps, which will provide optimal protection for your child's head throughout its development.

The seat back can be reclined using the lever at the front of the seat. This will allow your child to travel comfortably over long distances and thus make it easier for him or her to sleep in the car. In addition, thanks to the recline, your child's head will not fall off while sleeping.

Comfort and safety :

Choosing the Easygo brand is a guarantee of safety. Each product has passed all the required tests and is manufactured by professionals in the baby products industry.

The Easygo Nino is equipped with the Side Armor protection system, which guarantees better protection in the event of a side impact.

This seat is equipped with a tensioning system for the seat belts. The pretensioners (a system that aims to reduce the elasticity of the belt by tensioning it backwards very quickly) allow better tensioning of the car belts and thus stabilize the connection of the car seat to the vehicle seat. The Nino is also equipped with several belt guides for both the rear-facing and forward-facing positions. This means that the seat is always stable and well positioned.

The Nino is equipped with a 5-point safety harness, which can be easily adjusted according to the morphology of the baby or child and maximizes the firmness of the attachment.

This seat is sold with a reducer cushion to comfortably support smaller babies.

Standards and certifications for car seats :

- Approved to standard (European approval ECE R44/04)

- Manufactured according to ISO 9001 quality standard/p>

Installation :

Car seat installation for children from 9 to 18 kg : remove the upper backrest lock and push the backrest forward. Pass the belt between the backrest and the base of the child car seat and insert it into the corresponding receiving buckle to fasten it. Open the rear (back) belt guide (the one closest to the buckle) and the belt tensioner cover. Pass the rear belt through the open guide and the lap belt through the two lap belt guides and under the tensioner cover. Adjust the belts and close the rear belt guide and tensioner cover. Make sure that the tensioner is correctly adjusted, a characteristic "click" sound should be heard. Position the back belt so that it passes through the center of the top of the child car seat base, press the backrest against the base again and insert the locking device. Partially pull out the top lock and pull the back belt over the top lock. Push the top lock back in as far as you can.

Installing the car seat for children from 18 to 36 kg : pull out the rear belt guide on the bottom side of the headrest, pull the belt through the guide and reinsert it. Place the child in the seat and secure the child with the vehicle seat belts, inserting the belt into the corresponding receiving buckle. Make sure that the lap belt passes as low as possible over the hips and that the rear (back) belt passes midway between the child's shoulder and neck. Tighten the belt. Adjust the height of the headrest to the height of the child.

Technical specifications :

Length: 500 mm

Width: 510 mm

Height: 640 mm

Weight: 8.7 kg

2 years warranty

The Easygo Nino is available in 3 colors :

- Carbon (black)

- Titanium (dark grey)

- Navy (blue)