The Klippan Dinofix is a seat that is used rear facing. According to the R44/04 standard, up to 9 kg, a child must travel rear facing. The Dinofix makes it possible to extend this rear facing use up to 13 kg of the child. The purpose of this extended use is to guarantee perfect protection in the event of a collision. In the event of a frontal impact in case of accident, the child's body is pushed to the bottom of the seat instead of being propelled forward. This protects the sensitive areas that become stronger from the age of 4 (head, neck and spine).
Period of use: from birth up to 13 kg or 87 cm (1.5 years approximately)
Group : 0+
This seat can as well be installed on the base (sold individually in our site) Isofix or belted, or just with the belted seat. It is an ideal asset if you change cars or if you wish to use it in several vehicles. The Isofix base (sold individually) is compatible with our Klippan Triofix group 1, 2 and 3 seats. It is therefore possible to start transporting your newborn with your Dinofix seat and then switch to Triofix when your child reaches 13 kilos (87 cm). Thus, from birth to 10 years old (36 kg or 125 cm), only two purchases of car seats are necessary for your child plus the purchase of a single base.
The Dinofix is one of the largest car seats on the market. Its reducers will allow it to welcome in great comfort a newborn as well as a child over one year old thanks to its optimal ergonomics.
The Dinofix is compatible with all "Maxi Cosy" strollers and Klippan Firstline and City Tour Lux strollers.
It benefits from the "Kiss Side Protection" system which improves absorption in the event of side or frontal impact and better protects your child during a possible impact.
The seat is equipped with a 3-point safety harness, easily adjustable according to the morphology of the baby or the child.
Its "gripp" carrying handle will allow you to transport your child in complete safety. Moreover, the weight of the seat being 3,85 kg, you will be able to lift it easily.
The Isofix base of the seat is reinforced by a load leg.
- Approved according to the standard (European approval ECE R44/04)
- Product awarded at the Swedish Barnochbaby exhibition for the creation of a base for two seats (Dinofix and Triofix)
- Respect of the European recommendations
The Dinofix has a very simple installation since its base is itself very easy to install in a vehicle.
Installation with Isofix base :After unfolding the load leg, place the base on your seat and clip the two Isofix parts of the base to the two Isofix anchor points of the car. Then adjust the load leg so that it is securely wedged to the floor of your car.
Weight : 4 kg
Seat entirely removable and washable at 30° as well as the reducers and padding
Manufacturer's warranty: 1 year
One additional year of guarantee offered by Babylor
The Dinofix is available in 4 colors :
- Freestyle (black contour and interior with grey seams)
- Beige (black contour of the cosy, beige reducers and grey seams)
- Black&Red(black contour and interior, red reducers and grey stitching)
- Black&Grey (grey reducers)
|Child's age||Baby (0 to 1 year)|
|Child's weight||From 0kg to 13kg rear facing|
|Child's height||Less than one meter|
|Features of the car seat|
|Car seat's weight||10kg|
|Child's attachment||5-point harness|
|Baby reducer cushion included||Yes|
|Compatible with a stroller||Yes|
|Seat with removable cover||Yes|
|Seat orientation||Rear facing only|
|Installation with an Isofix base||Yes|
|Isofix fixation||Yes (Isofix + load leg)|
|Fixation with belt||Yes|
|Fixing of the seat||Isofix et ceinturé|
|Independent crash test|
|Year of the crash test|
|Depth||720 to 760mm|