BAB0326
New product
Warning: Last items in stock!
Availability date:
The Easygo Tinto is a car seat equipped with the Isofix system as well as the Top Tether system. It can be used rear-facing up to 13 kg and forward-facing up to 25 kg.
Period of use : from birth to 25 kg (approximately 7 years)
Group : 0+/1/2
The Tinto seat has an Isofix quick mounting system. This system not only facilitates the installation of the seat in the car, minimizing the risk of incorrect installation, but also offers greater safety in the event of sudden braking or collision on the road.
To complement the Isofix system, the car seat is also equipped with a Top Tether (a strap located at the rear of the seat that is fixed in the trunk of the car). Thus, in addition to being perfectly fixed thanks to the Isofix, the car seat will remain stable thanks to the Top Tether.
A removable support (load leg) is placed at the front of the seat to secure the assembly and increase the angle of inclination when the seat is in the backrest position (group 0+).
Choosing the Easygo brand is a guarantee of safety. Each product has passed all the required tests and is developed by professionals in the childcare sector.
The seat back can be reclined using the lever at the front of the seat. It will allow your child to travel comfortably over long distances and thus facilitate sleep in the car. In addition, the recline function prevents your child's head from falling off while sleeping.
The Easygo Tinto features the Side Armor protection system, which ensures greater protection in the event of side impacts.
This seat is equipped with a tensioning system for the seat belts. The pretensioners (a system that aims to reduce the elasticity of the belt by tensioning it backwards very quickly) allow better tensioning of the car belts and thus stabilize the connection of the car seat to the vehicle seat. The Tinto is also equipped with several belt guides for both the rear-facing and forward-facing positions. This means that the seat is always stable and well positioned.
The Tinto is equipped with a 5-point safety harness, which is easily adjustable according to the morphology of the baby or child and maximizes the firmness of the attachment.
- Approved according to the standard (European approval ECE R44/04)
- Manufactured according to ISO 9001 quality standard
Installation of the car seat with the 3-point belt (rear facing, group 0+) : Install the car seat in the vehicle. Attach the cushion to the front of the child seat base. Correct installation will be indicated by a distinctive clicking sound. Adjust the infant seat to the most reclined position. Place the child in the seat and fasten it with the car seat belts by inserting them into the corresponding buckle. Position the belts so that the lap portion of the belt passes through the belt guide under the base of the child seat and the arm portion of the belt passes through the blue belt guides at the back of the child seat. Tighten the belt so that it is not too loose.
Installing the seat with Isofix and Top Tether (group 1) :
Press the release buttons on the Isofix points. Insert the ISOFIX locks into the vehicle's anchorage points, pressing the child seat firmly against the backrest until it locks. You should hear a distinctive clicking sound. Make sure the car seat is snug and does not move. Secure the Top Tether strap.
Installing the seat with 3-point seat belt (group 1) :
Pull out the upper backrest lock and push the backrest forward. Pass the belt between the backrest and the child seat shell and insert it into the corresponding buckle to buckle it. Open the guide on the back of the belt (closest to the buckle) and the belt tensioner cover. Pass the belt (dorsal part) through the open guide and the lap belt through the two lap belt guides and under the tensioner cover. Tension the belts and close the back belt guide and the tensioner cover. Make sure that the tensioner is properly adjusted. A characteristic "click" should be heard. Position the back belt so that it passes through the center of the top of the child seat base, press the backrest against the base again and insert the locking device. Partially pull out the top lock and push the backrest belt over the top lock. Push the top lock back in as far as you can.
Installing the seat with 3-point seat belt (group 2) :
Before installation, remove the 5-point harness from the child seat. Place your child in the seat and buckle him/her in with the 3-point seat belt. Pass the seat belt through the corresponding guide at the top of the child seat, then pass the belt buckle through the opening in the car seat near the junction of the backrest and the seat. Insert the buckle into the corresponding buckle receiver attachment on the vehicle seat. Tighten the belts and make sure they fit snugly around the child.
Length : 540 mm
Width: 500 mm
Height: 750 mm
Weight: 11.9 kg
2 years warranty
The Easygo Tinto is available in 2 colors :
- Carbon (black)
- Titanium (dark grey)
Child's age | Evolving from baby to child (0 to 7 years) |
Child's weight | From 0kg to 13kg rear facing and to 25kg road side |
Car seat's weight | 12kg |
Group | Group 0/1/2 |
Child's attachment | 5-point harness then belt |
Baby reducer cushion included | Yes |
Rotating | No |
Reclining | Yes |
Adjustable height | Yes |
Carrying handle | No |
Compatible with a stroller | No |
Seat with removable cover | Yes |
Washable cover | Yes |
Ergonomy | Reclining |
Seat orientation | Rear facing and road side |
Installation with an Isofix base | No |
Isofix fixation | Yes |
Fixation with belt | Yes |
Fixing of the seat | Isofix et ceinturé |
European approval | R44/04 |
Width | 500mm |
Depth | 540 mm |